It is actually very simple to replace pneumatic lawn mower tires—an opportunity that any DIY enthusiast looking for scotts lawn mower parts would enjoy. So, when you have a flat tire on your lawn mower the next time, don’t think of getting an expert to look at it. With just a little practice, you can be an expert at this.
The problem of finding scotts lawn mower parts is due to the small size of these wheels. The small size of the tires makes them difficult to replace and also to make the tires fit on the machines. You would need a good screwdriver and a strong vice in order to get the job done properly.
So, here is how you can go about replacing your pneumatic lawn mower tires yourself.
What you will require:-
- A C-clamp or a large vice
- Screwdrivers—large ones, two of them.
Step # 1
The first step is to use the vice on the wheel and the tire and to clamp them in position. Incline the wheel by a small degree so that the vice has its one jaw on the side of the rim and the other on the tire. This is a good grip. In this position, if you make the vice any tighter, the tire will simply trail off the rim. This makes your task of removing the bad tire easier. If you find the tire coming off the rim, you must make the vice looser and rotate the tire slowly. Again tighten the vice till you get this slack.
Step # 2
Continue doing this till the wheel is completely removed from the vice. Then move it over and clamp the side of the rim, from the same side that the tire was removed from. Then you have to give a push to this tire on the extreme side of the rim. Use the other jaw of the rim to do this.
A vice does this job nicely, but if you don’t have a vice, you could use a C-clamp to do it.
Step # 3
The next step is to put the tire and the wheel on the flat ground. Pry the tire from the rim using one of the large screwdrivers. Then, using the other screwdriver, pry the tire from another point on the rim as well. The second screwdriver must be distant from the first.
Step # 4
Now, remove the first screwdriver and put it in another place, but as far from the second screwdriver as you can. Work at prying the tire in a cyclic manner using these two screwdrivers. When you complete the circle, the lawn mower tire pops off the rim it is placed on. For scotts lawn mower parts, check out online sites like ebay.